|
|
Shipping area selected: UK
|
Select type of tool:
Standard turning tools
Fixed angle ring tool
The Brailsford set
Stumpy, Dumpy & ...
Miniature tools
Sets of standard tools
Return to:
Tools: general description
Entrance to shop
|
|
|
Speciality Tools
Page 1
 |
|
Heavy duty scrapers |
|
|
Reg Sherwin shear scraper |
|
|
The Bedan |
|
|
Ring tool |
|
|
Sizing tool
|
Page 2 |
|
|
The thin parting tool |
|
| Heavy duty HSS scrapers |
|
Extra strong for the most demanding work:
1 1/2 ins (37 mm) wide and 3/8 ins (9 mm) thick.
|
Prices:
| Radiused end |
Handled |
£44.28 |
|
| Radiused end |
Unhandled |
£39.22 |
|
| Dome end |
Handled |
£44.28 |
|
| Dome end |
Unhandled |
£39.22 |
|
| Round nose |
Handled |
£44.28 |
|
| Round nose |
Unhandled |
£39.22 |
|
| Square end |
Handled |
£44.28 |
|
| Square end |
Unhandled |
£39.22 |
|
Back to top
Reg Sherwin shear scraper
|
Made from 60 degree triangular carbon steel, it is designed to give a perfect shear scrape angle when laid flat on the rest, inboard or outboard. Size: 5/8 inch (15mm)
|
Prices:
|
Handled |
£18.75 |
|
|
Unhandled |
£14.15 |
|
Back to top
The bedan
|
A French variation on the beading and parting tool, with a single bevel cutting edge and clearance down each side. In high speed steel only.
|
Prices:
|
Width 3/16 inch (4 mm) |
Handled |
£18.63 |
|
|
|
Width 3/16 inch (4 mm) |
Unhandled |
£14.03 |
|
|
Width 1/4 inch (6 mm) |
Handled |
£21.39 |
|
|
|
Width 1/4 inch (6 mm) |
Unhandled |
£16.79 |
|
|
Width 3/8 inch (9 mm) |
Handled |
£23.69 |
|
|
|
Width 3/8 inch (9 mm) |
Unhandled |
£19.09 |
|
Back to top
Ring tool
|
Made from HSS on a high tensile shaft for bowl and end grain work. Now with internal and external bevels.
|
Prices:
|
Diameter 7/16 inch (11 mm) |
Handled |
£24.96 |
|
|
Diameter 7/16 inch (11 mm) |
Unhandled |
£20.36 |
|
|
Diameter 5/8 inch (15 mm) |
Handled |
£33.47 |
|
|
Diameter 5/8 inch (15 mm) |
Unhandled |
£28.87 |
|
Back to top
Sizing Tool
|
An indispensable tool when duplicating diameters between centres. This item is used in conjunction with a 3/8 in (9 mm) HSS or carbon beading and parting tool as shown in illustration. The latter tools are not supplied with the sizing tool.
|
Prices:
| Hook gate on its own |
£29.33 |
|
Back to top
|
|